Please follow the link below to find a locksmith near you. You will need to contact a local auto locksmith. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. Turn the ignition switch to LOCK (O) to exit programming mode.Ģ002 Honda Accord Key Programming InstructionsĭIY key programmer procedure is not available for this vehicle.Repeat Step 2 to program additional keyless entry remote transmitters into the remote keyless entry module (up to four keyless entry remote transmitters maximum). Make sure door locks cycle after you push each remote button to confirm system has accepted the remote. provides courtesy lighting upon entry to and exit from the vehicle. Press the LOCK or UNLOCK button on each remote you want to program.Make sure the power door locks cycle to confirm you are in programming mode. Press the LOCK or UNLOCK button the same remote.Press the LOCK or UNLOCK button on one of the remotes.Turn ignition switch to ACCESSORY (I) or LOCK (O).(An unprogrammed remote can be used for this step.) Make sure all the doors are UNLOCKED before starting this programming procedure. Note: a maximum of 3 remote transmitters can be programmed. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode. You must reprogram all of the keyless remotes once you are in the programming mode. Turn the ignition switch to LOCK to exit the programming mode.× 2000 Honda Accord Keyless Entry Remote Fob Programming InstructionsĮntering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work. Make sure the power door locks cycle after you press each transmitter button to confirm that the system accepted the transmitter’s code.Ĩ. Within 10 seconds, press the “Lock” or “Unlock” button on each transmitter. Make sure the power door locks cycle to confirm that the system is in programming mode.ħ. Press the “Lock” or “Unlock” button on the same transmitter. Repeat steps 1, 2, and 3 two more times using the same transmitter used in step 2.Ħ. (An unprogrammed transmitter can be used for this step.)Ĥ. Press the “Lock” or “Unlock” button on one of the transmitters. You must complete steps 1–6 within 4 seconds of the previous step to keep the system from exiting the programming mode.Ģ.You must reprogram all of the transmitters once you are in the programming mode. Entering the programming mode cancels all learned transmitter codes, so none of the previously programmed transmitters will work.If a fourth transmitter code is programmed, the code for the first transmitter is erased. The transmitter codes are stored in a stacking-type memory. ![]() The system accepts up to three transmitters.The 1998–99 transmitter LED lights up in approx.1.1 seconds. Press & hold the trunk release button while looking at If you are not sure which transmitter you have: 1998–99 transmitter works the doors of a 2000–03 Accord, but it does not open the trunk. Transmitters for the 1998–99 Accord and the 2000–02 Accord look exactly alike, however they are not interchangeable. ** If you have a DX or LX 1999 Honda Accord you will need FCC ID: A269ZUA101 *Compatible / Interchangeable Part#: Acura Logo KOBUTAH2T Scroll through listing for full details and description of any imperfections. The used Honda key fob may have some signs of cosmetic wear, but is fully operational and functions as intended. Used: An item that has been used previously. This is ONE (1) ready to program Factory Original Equipment OEM Honda keyless entry remote.ĬOMPATIBILITY: please match the FCC ID # on the BACK of your CURRENT remote with the FCC ID # in the listings below.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |